We produce a clear specification of how much heat and hot water the building needs by completing a CIBSE room by room heat loss analysis from the plans. With new builds and renovations, space heating demand is reducing, and hot water consumption is increasing. The heating system is a key part of the building design process.
We recommend renewable heating solution that balances future energy savings for the client, with the proposed construction and project budget.
We provide air source heat pumps, ground source heat pumps, heat battery storage and MVHR, together with radiators, underfloor heating or direct electric heating. We can also integrate solar PV or solar thermal to the system if required.
We give you best value and simple site management support with a flexible approach to installation and project management.
- We will support your trades teams with a full package of schematics and method statements to complete your installation. You will benefit from our extensive technical experience in renewable heating solutions with our package of detailed mechanical and electrical schematics and site specific method statements to ensure your trades are fully equipped to deliver your installation.
- We can provide a complete installation service with our local qualified teams across Cornwall, Devon and Somerset if you need this support too – all our teams are fully vetted for competency, technical accreditations and relevant insurances to work on your site to deliver your installation.
- You will benefit from our extensive technical experience in renewable heating solutions with our package of detailed mechanical and electrical schematics and site specific method statements to ensure you are fully equipped to deliver your installation.
This is critical to deliver a successful solution. Heat pumps require a much more detailed configuration and testing process than a traditional boiler, to ensure they are able to operate as designed.
Heating circuits need to be purged of air, and the water flow be fully balanced to ensure heat can be efficiently delivered around the building. Controls for the both the heat pump and distribution system must be reviewed and tested. The heating distribution controls may need to be reconfigured to deliver the desired room temperatures. Configuration with solar PV panels and battery storage add to the complexity.
Only by completing this thorough process, will the system meet the heating needs at maximum efficiency and lowest heating costs.
The MCS certification and building control notification is then completed to ensure a successful application for the RHI tariff payments and comply with local building control.
- Mandy Lindsay, Cornwall
"Thanks for organising everything. Luke was great."
- Nathan Davis, Arco2
“We've had an air-source heat pump designed and installed by Abode Heat for our office providing very low cost heating. The heat pump costs are further reduced when using free electricity from our solar panels so a great pairing! Its great to be able to show our clients the benefits of implementing renewable heat as part of their build on-site”
- Sprout Developments Ltd
"Thanks for all your help so far at Westholme on our latest project, Ali & Luke are a great gang to work with."
Blog posts relevant to builders and trade:
An architect recently asked me to formally review a tender submission that included an air source heat pump. Both…31st October 2019
The “best” long term energy strategy and renewable heating solution needs to be identified and agreed at the design stage, not just fitted…17th September 2019
Without being able to quantify your heat and hot water requirement how can you possibly get the best advice…17th July 2019
From April 1st 2019, landlords of properties with a rating of F and G will have to pay up…17th March 2019
There has been lots of debate over recent years on what is renewable heat. This can be simply defined...9th March 2019
80% of domestic energy requirements are for heat and hot water. Maslow’s Hierarchy of Needs explains why we invest…5th March 2019
They do look noisy don’t they; is how I normally respond when a customer asks me that question –…26th February 2019